SHC 629 Mobil 151859

Mobil SHC 600 is a series of oils for bearings and gears. They are made based on synthetic paraffin-free hydrocarbons. Combination of a high viscosity index and a unique additive system enables these oils to demonstrate their excellent properties in extreme operation conditions (in high and low temperatures), they significantly exceed mineral oils in terms of their characteristics. Mobil SHC 600 have the following benefits: Reduced wear of bearings and gears and reduced maintenance costs thanks to high load-carrying and unique anti-wear properties. Reduced energy consumption, enhanced efficiency of gears and decreased oil operating temperatures due to a low friction index. Emergency-free equipment performance in all temperature range with excellent low-temperature properties. Reduced consumption of lubricants and no deposits and sediments due to excellent resistance to oxidation and thermal stability. Application. Mobil SHC 600 oils are recommended for use in industrials gears and bearings where the oil temperature in the system does not enable usual lubricants to demonstrate satisfactory results in terms of their life time. The oils of this series perfectly lubricate gears and bearings in extremely low and high temperatures. The unique properties of the oils enable to use them for low- and mid-speed slide and rolling bearings in high temperatures or under big loads. Typical application of the oils is in rolling bearings of agitators and bearings of cast rolls subject to high temperatures. The oils of Mobil SHC 600 series are compatible with the same sealing materials as usual mineral oils. Although they are compatible with the mineral-based products, impurities may reduce their values. Consequently, it is recommended that before changing a system to one of Mobil SHC 600 Series products, it should be thoroughly cleaned out and flushed to achieve the maximum performance benefits. These products resist well to shear impacts, especially in heavy-duty gears which prevents viscosity reduction.